Innovation

Roadway Safety Innovation

Innovation in the roadway safety industry

Outsiders of the transportation infrastructure industry may look to autonomous vehicles as an icon of innovation on the roadways, but for state Department of Transportation (DOT) officials, manufacturers, suppliers, and contractors in the roadway safety and infrastructure industry, innovation is not a stationary achievement. It is much more than a mile marker and not as easily defined.

With different perspectives and priorities, industry stakeholders are finding that in addition to new technologies, innovation is heavily reliant on communication between entities. Industry leaders are working together to move forward and ATSSA is no different. The association works year-round to progress and develop creative solutions for all of its initiatives including highlighting innovative products and technologies, training, and ATSSA membership.


One innovative effort ATSSA is involved in is a joint initiative with the Transportation Research Board (TRB) Standing Committee on Traffic Control Devices (AHB50). Both ATSSA and TRB sponsor and conduct an exciting design competition, the Traffic Control Device (TCD) Student Challenge, to promote innovation and stimulate ideas in the traffic control devices area with a goal to improve operations and safety.


Find recent updates on the latest innovations in the resource list below and be sure to check back for updates.



Exhibit at ATSSA's Annual Traffic Expo

NPRO

Do you have an innovative roadway safety product? Exhibitors can showcase their innovations in the New Products Rollout at the Annual Convention & Traffic Expo. Products released after Jan. 1 of this year qualify for entry. Twenty will be accepted for the New Product Listing and just 12 will be accepted for presentation to a panel of judges. The top three products will earn an Innovation Award that will be announced during the Convention.


Learn more
about featuring your innovative product to key industry professionals. View videos of last year's entries and award winners.



Resources

ATSSA & NCUTCD urge publication of MUTCD without delay

Committee votes today for publication without incorporating PROWAG

Pam 0 4717 Article rating: 4.0

The National Committee on Uniform Traffic Control Devices (NCUTCD) passed a resolution today recommending the final rule on the Manual on Uniform Traffic Control Devices (MUTCD) not be delayed to address this week’s issuance of a final rule for pedestrian accessibility issues.

The U.S. Access Board on Tuesday issued its final rule providing minimum guidelines for accessibility of pedestrian facilities in the public right-of-way, known as PROWAG.

On May 2, ATSSA President & CEO Stacy Tetschner sent a letter to Federal Highway Administration Administrator Shailen P. Bhatt urging the FHWA to publish the updated Manual on Uniform Traffic Control Devices (MUTCD) by the deadline set forth in the U.S. Code, which was May 15.

ATSSA voted in favor of today’s resolution passed by the NCUTCD.

Final rule issued for accessibility of pedestrian facilities in public right-of-way

Pam 0 2579 Article rating: 2.8

The Architectural and Transportation Barriers Compliance Board (Access Board) today issued its final rule providing minimum guidelines for accessibility of pedestrian facilities in the public right-of-way, known as PROWAG.

These final guidelines have been long awaited, in particular by state and local governments that have sought them for more than 30 years.

The final rule for PROWAG was published in the Federal Register and is effective Sept. 7. Once adopted, the guidelines “would ensure that facilities used by pedestrians, such as sidewalks and crosswalks, constructed or altered in the public right-of-way by federal, state, and local governments are readily accessible to and usable by pedestrians with disabilities,” according to the posting.

NCUTCD summer meeting provides traffic signals, VRU, MUTCD updates

Pam 0 7395 Article rating: No rating

The National Committee on Uniform Traffic Control Devices (NCUTCD) summer meeting addressed a variety of topics including traffic signals and vulnerable road users and provided an indication that work is progressing on the updated Manual on Uniform Traffic Control Devices (MUTCD).

In May, ATSSA President & CEO Stacy Tetschner sent a letter to Federal Highway Administration Administrator Shailen P. Bhatt urging the FHWA to publish the updated MUTCD by the May 15 deadline set forth in the U.S. Code. Tetschner acknowledged the "tremendous amount of work” needed to update the MUTCD but said he wanted to “stress how vital it is that this statutory deadline is met.”

Toward the end of the summer meeting of the NCUTCD, also referred to as “the National Committee,” federal officials made reference to August, suggesting work on the final rule is moving forward. However, there was no commitment that it would be published that month.

 

Apply for ATSSA’s New Products Rollout by Nov. 1

Pam 0 3150 Article rating: 4.7

Apply by Nov. 1 to participate in ATSSA’s New Products Rollout (NPRO) to discover the future of roadway safety innovations. NPRO will be held during ATSSA’s 54th Annual Convention & Traffic Expo in San Diego, Feb. 2-6.

Exhibitors who introduced products after Jan. 1, 2021, are eligible to apply. This year’s earlier deadline is due to the Convention’s earlier date.

Entries accepted for NPRO will be included in the New Products Listing, which showcases the products to more than 3,700 roadway safety professionals who attend ATSSA’s Annual Convention & Traffic Expo, including listing on the Convention website and mobile app.

‘Culture of safety’ panel featured at Midyear Meeting

Annual meeting outside Chicago includes baseball fundraiser

Pam 0 3111 Article rating: 5.0

ATSSA’s Midyear Meeting features a panel on “Creating a Culture of Safety in the Workplace.”

Panelists include Doug Dolinar of Guidemark Inc., Kathi Holst of D2K Traffic Safety Inc., Chris Brookes of the Michigan Department of Transportation (MDOT) and Cameron Greene of ATSSA. Dave Krahulec of Horizon Signal Technologies will moderate.

The Midyear Meeting will be held Aug. 15-18 at the Loews Chicago O’Hare Hotel in Rosemont, Ill. Registration is now available. The hotel block closes July 24.

RSS
1345678910Last

EasyDNNnewsWidgets