Innovation

Roadway Safety Innovation

Innovation in the roadway safety industry

Outsiders of the transportation infrastructure industry may look to autonomous vehicles as an icon of innovation on the roadways, but for state Department of Transportation (DOT) officials, manufacturers, suppliers, and contractors in the roadway safety and infrastructure industry, innovation is not a stationary achievement. It is much more than a mile marker and not as easily defined.

With different perspectives and priorities, industry stakeholders are finding that in addition to new technologies, innovation is heavily reliant on communication between entities. Industry leaders are working together to move forward and ATSSA is no different. The association works year-round to progress and develop creative solutions for all of its initiatives including highlighting innovative products and technologies, training, and ATSSA membership.


One innovative effort ATSSA is involved in is a joint initiative with the Transportation Research Board (TRB) Standing Committee on Traffic Control Devices (AHB50). Both ATSSA and TRB sponsor and conduct an exciting design competition, the Traffic Control Device (TCD) Student Challenge, to promote innovation and stimulate ideas in the traffic control devices area with a goal to improve operations and safety.


Find recent updates on the latest innovations in the resource list below and be sure to check back for updates.



Exhibit at ATSSA's Annual Traffic Expo

NPRO

Do you have an innovative roadway safety product? Exhibitors can showcase their innovations in the New Products Rollout at the Annual Convention & Traffic Expo. Products released after Jan. 1 of this year qualify for entry. Twenty will be accepted for the New Product Listing and just 12 will be accepted for presentation to a panel of judges. The top three products will earn an Innovation Award that will be announced during the Convention.


Learn more
about featuring your innovative product to key industry professionals. View videos of last year's entries and award winners.



Resources

Senators introduce resolution recognizing NWZAW 2023

Resolution lists steps for motorists to practice work zone safety

Pam 0 2719 Article rating: 5.0

Inspired by the death of an Indiana traffic control flagger, Senators Mike Braun (R-IN) and Richard Blumenthal (D-CT) this week introduced a resolution to recognize National Work Zone Awareness Week, which takes place April 17-21.

Ben Fisher was struck and killed in 2019 while working for a traffic control company on Indiana State Road 13, according to a statement from Braun’s office. The statement also notes the increase in work zone fatalities nationwide since 2006 and the goal of increasing awareness of the hazards of work zones for drivers, workers and pedestrians, and the value of training.

“Far too many road workers and emergency servicemen are injured and killed each year by automobile drivers. Ensuring the safety of these essential men and women is a no-brainer, and I’m excited to join Sen. Blumenthal to introduce legislation that raises awareness about making America’s roads less hazardous for everyone,” Braun said in announcing the resolution.

ATSSA notes need for flexibility in final rule for Buy America requirements

Letter to OMB seeks clarity on proposed rule, emphasizes impact on roadway safety

Pam 0 3025 Article rating: 5.0

ATSSA provided feedback to the Office of Management and Budget on Sunday regarding the proposed rules for Buy America requirements, asking for clarification on four specific issues and noting the importance of roadway safety infrastructure at a time when traffic fatalities are a major issue nationwide.

“ATSSA members are generally in favor of increasing the capacity to procure domestically-sourced construction materials and manufactured products for use on surface transportation projects,” ATSSA President & CEO Stacy Tetschner wrote to Deputy Controller Deidre A. Harrison. “However, ATSSA members are deeply concerned with the breadth and scope of the [Notice of Proposed Rulemaking] and the impact it could have on the timely and cost-effective delivery of much-needed roadway safety infrastructure improvements.”

The letter is in response to the NPRM on Guidance for Grants and Agreements – 2 CFR Parts 184 and 200 (Docket No. 2023-02617), which was published Feb. 9. The letter notes that ATSSA members manufacture, distribute and install roadway safety infrastructure devices such as guardrail and cable barrier, traffic signs and signals, pavement markings, work zone safety devices.

“It is important that any new Buy America requirements not have the unintended consequence of hindering the delivery of important roadway construction and roadway safety projects across the country,” Tetschner wrote.

Register at Convention to play a role in advocating for roadway safety

ATSSA’s Legislative Briefing & Fly-In set for April 18-19 in the nation’s capital

Pam 0 2365 Article rating: No rating

ATSSA’s 2023 Legislative Briefing & Fly-In offers members the opportunity to play a role in advocating for roadway safety at the national level.

This annual event, which is an exclusive member benefit, takes place April 18-19 in Washington, D.C. Members will have the opportunity to deliver roadway safety solutions to the Capitol Hill offices of lawmakers and their staffs, who craft policy that affects the roadway safety infrastructure industry for years to come.

Both House and Senate office buildings are fully open to visitors this year.

The 2023 Legislative Briefing & Fly-In coincides with National Work Zone Awareness Week (NWZAW), which will be held April 17-21 and has the theme, “You play a role in work zone safety. Work With Us.”

ATSSA congratulates Crawford on leading Highways & Transit Subcommittee

Pam 0 3896 Article rating: No rating

ATSSA congratulates Rep. Eric A. “Rick” Crawford, R-Ark., on his selection as chair of the House Subcommittee on Highways and Transit.

“We look forward to working with six-term Congressman Crawford in his new role as chair of this important subcommittee,” ATSSA President & CEO Stacy Tetschner said. “Chair Crawford is a veteran of the subcommittee and we look forward to partnering with him in support of the vital work of the roadway safety infrastructure industry and advancing roadway safety across the country. In his new role, Chair Crawford can help save lives on the nation’s roadways.”

Crawford issued the following statement regarding his selection as chair and the Infrastructure Investment & Jobs Act (IIJA), which became law in November 2021.

“An efficient and safe highway system is critical to America’s competitiveness in the global economy and a vital component of our national security,” he said. “I look forward to providing vigorous oversight of IIJA to ensure that those funds are spent on projects that are priorities for states and local government.”

Industry leaders offer expectations for 2023 in Winter issue of Roadway Safety

Magazine delves into rural road safety challenges, roadway worker distractions

Pam 0 2735 Article rating: 5.0

What issues are front of mind as ATSSA members contemplate 2023? What variables are being used to gauge how things will go in the long-term? What opportunities are on the horizon that are building excitement?

ATSSA asked four members who are leaders in different segments of the roadway safety infrastructure industry for their views on those questions and more for the Winter issue of Roadway Safety magazine, which is online today. Read what they had to say and see how their views compare to your own.

The Winter issue also explores rural road safety solutions, the importance of keeping workers from being distracted on the job, where wider pavement markings are being utilized and much more.

RSS
1345678910Last

EasyDNNnewsWidgets